DEC 19, 2024 UPDATE: SHIPPING NOTICE- I am excited to announce that Canada Post has resumed operations. Please expect delays in shipments as the backlog of packages at Canada Post are cleared.
******************************************************************************
Boler/Scamp – Stainless Steel Door Hinge Repair Kit
The Best Hinge Repair Kit Available
No need to replace your hinges, rebuild them and they will be better than new.
If the door hinges on your Boler or Scamp trailer worn out or if the bolt or spring are broken or rusted our Stainless Steel Door Hinge Repair Kit is the solution
These kits contain the highest quality parts at a reasonable price that won’t rust and will last for many years?
The kit includes everything you will need to rebuild both hinges, one kit is all you need for your trailer:
Kit includes:
2 – solid brass pivot balls (made in USA)
2 – 316 stainless steel bolts
2 – 316 stainless steel nylock nuts
2 – 316 stainless steel springs (made in Canada)
4 – nylon isolation washers
Synthetic Teflon assembly lube
Boler Door Lock Replacement Kit for Bargman L400 – Fits 1975-1988 Boler
Our door lock kit is designed to replace the discontinued Bargman L400 and Lyster 20-213 / 20-214 door locks found on boler trailers although it may also fit many other vintage trailers
Using common tools the average DIY’er can replace their door lock with a modern Bauer lockset with deadbolt.
Our complete kit includes:
1 – Chrome Bauer Door lock, packaged
1 – Inner Aluminum Adapter Plate ( White factory coated aluminum)
1 – Outer Aluminum Adapter Plate (White factory coated aluminum)
1 – Aluminum Striker Plate
2 – #8-32x½” Pan Head Machine Screws
4 – #8-32x¾” Pan Head Machine Screws
4 – #8-32×1” Pan Head Machine Screws
2 – #10-24x¾” Flat Head Machine Screws
2 – #10 Flat Washers
2 – #10-24 Nuts
6 – ⅛” Aluminum Rivets
1 roll – Butyl Sealing Tape
Upgrade your door lock today at an incredibly low price
NOTE: This lock kit will NOT FIT fibreglass trailers that have a moulded profile around the door lock like Trillium, Surfside, Burro and early model Escape (ETI).
This door lock replacement kit was specifically designed to replace the Bargman L400 door lock on 1975-1988 boler.
The area around the door lock must be flat and smooth on both the inside and outside with a door thickness of no more than 1½”. If you plan on installing this lock on any other trailer than a boler please Contact Me.
See description at bottom of page for more information
NOTE: I hand build the adapter plates for each lock kit order, I try to keep inventory on hand but if I run out of adapter plates your order can take several days to assemble. If there is any delay with your order I will send you an email with expected shipping date
Due to the global supply shortage of dust mask and disposable gloves, we will not be including them in our kits until further notice.
No return or refund, see Terms & Conditions
Boler Door Lock Replacement Kit – Fits 1968-1974 Boler & most Scamp
Our door lock kit is designed to replace the original “L” shaped utility door locks found on many vintage trailers including 1968-1974 boler and most models of Scamp trailers.
Using common tools the average DIY’er can replace their door lock with a modern Bauer lockset with deadbolt.
This kit comes with a selection of spacers to achieve the required door thickness of between 1⅛” to 1⅜” thick. NOTE: the lock will not work on doors thicker than 1½”
Our complete kit includes:
1 – Chrome Bauer Door lock, packaged
1 – Inner Aluminum Adapter Plate
1 – Outer Aluminum Adapter Plate
1 – Adapter Trim Plate
1 – ⅛” Lock Spacer Plate
1 – ¼” Lock Spacer Plate
1 – Aluminum Striker Plate
2 – #8-32x½” Pan Head Machine Screws
4 – #8-32x¾” Pan Head Machine Screws
4 – #8-32×1” Pan Head Machine Screws
2 – #10-24x¾” Flat Head Machine Screws
2 – #10 Flat Washers
2 – #10-24 Nuts
4 – ⅛” Aluminum Rivets
2 – 3/16″ large head rivets
1 roll – Butyl Sealing Tape
Upgrade your door lock today at an incredibly low price
NOTE: This door lock replacement kit was specifically designed to replace the door lock on 1968-1974 boler & Scamp trailers.
See description at bottom of page for more information
If you plan on installing this lock on any other trailer than a boler please Contact Me. This lock kit will NOT fit fibreglass trailers that have a moulded profile around the door lock like Trillium and Burro. The area around the door lock must be flat and smooth on both the inside and outside with a door thickness no more than 1½”.
NOTE: I hand build the adapter plates for each lock kit order, I try to keep inventory on hand but if I run out of adapter plates your order can take several days to assemble. If there is any delay with your order I will send you an email with expected shipping date
Due to the global supply shortage of dust mask and disposable gloves, we will not be including them in our kits until further notice
No returns or refunds, see Terms & Conditions